Lijiejing Gloves guarantees its quality through strict quality control system, advanced production technology and perfect testing process as follows. Strict raw material screening: Lijiejing Gloves strictly tests the raw materials, such as testing the purity of rubber, viscosity, etc. to ensure that the halogen content reaches the low halogen standard:
- Strict screening of raw materials: Lijiejing Gloves carries out strict testing of raw materials, such as testing the purity of rubber, viscosity, water content, etc., to ensure that the halogen content reaches the low-halogen standard, so as to ensure the quality and safety of gloves from the source.
- Advanced production process control: In the production process, Lijiejing Gloves has carried out strict quality inspection in many key processes. For example, during the impregnation of nitrile latex, the film is checked to see if it is uniformly attached, and the tolerance of glove thickness is controlled at ±0.05mm; during the vulcanisation process, the deviation of the vulcanisation temperature is monitored at ≤0.5℃ to ensure uniform vulcanisation, and at the same time, the gloves are guaranteed to have a tensile strength of ≥14MPa, and an elongation rate of ≥500% at break.
- Perfect quality inspection process: Lijiejing gloves factory has a complete set of quality inspection process, including leaching quality inspection, crimping quality inspection, chlorination and cleaning quality inspection, demoulding quality inspection, etc. The finished products will also be subject to puncture strength and other tests. The finished products are also tested for physical properties such as puncture strength, which is required to be ≥4.5N, and passed ROHS, halogen and other third-party authoritative certificates to ensure that the chemical properties are qualified.
- Strict quality system: Lijie follows ISO 9001 quality management system and ISO 13485 medical device quality management system, and strictly controls the whole process from production to delivery to ensure the stability and reliability of product quality. Good control of the production environment: the packaging of Lijie’s gloves is under strict control of the production environment.
- Good control of production environment: Gloves are packed in Class 100 clean room to test whether the cleanliness of the environment meets the standard, oxygen permeability <0.5cc/m²/day, and the inner and outer double-layer packaging ensures that the gloves are not contaminated, which further guarantees the quality of the gloves.
Post time: Oct-14-2025